GEPRC CineLog35 V2 3.5inch Cinewhoop Quad – GEP-F722-45A AIO V2 Caddx Ratel2 2105.5 2150KV 6S

Description

Summary
nGathering the experience and evolution of the GEPRC team in all aspects, CineLog35 V2 is finally launched to the market with better performance.
nCineLog35 v2 version integrated with O3 VTX. The CineLog35 V2 version of the main carbon plate and injection protection frame increased the 7075 aluminum column for structural strengthening.
nThe battery mounting method uses a tie with 7075 aluminum parts fixed. The power XT60E1-M plug is integrated with the carbon plate for convenient application. The protective frame for O3 Air Unit adds a memory card and USB port for easy data reading.
nEquipped with F722-45A AIO and the new SPEEDX2 2105.5 motor, more power, with aggressive power system and faster response.
nThis is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure, and safety to meet the user’s requirements for flying and filming various scenes indoors and outdoors. The user’s satisfied voice is the motivation for us to move forward.
nFeature
nNew appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent.
nAdopts the GEP F722-45A AIO V2 high performance flight controller.
nPropeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading
nFor O3 camera design independent under hanging shock absorption gimbal, to solve the camera IMU resonance issues, to achieve the optimal anti-shake effect.
nSPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel.
nPower cable using XT60E1-M plug and carbon plate integrated design, convenient application.
nBattery installation method using a tie with 7075 aluminum parts fixed, solid and stable.
nCarefully tuned 3.5-inch HD cinematic FPV with flexible and delicate flight feeling.
nSpecifications
nModel: Cinelog35 V2 Analog
nFrame: GEP-CL35 V2
nWheelbase: 142mm
nGimbal Plate: 2.0mm
nTop Plate: 3.5mm
nBottom Plate: 1.5mm
nFC system:GEP-F722-45A AIO V2
nMCU: STM32F722RET6
nGyro: ICM 42688-P
nOSD: Betaflight OSD w/AT7456E chip
nESC: 8Bit 45A
nVTX: GEPRC RAD 1W(UFL)
nCamera: Caddx Ratel2
nAntenna:GEPRC Peano 5.8 RHCP UFL
nMotor: SPEEDX2 2105.5-2150KV(6S)
nPropeller: HQProp D-T90MM
nCineLog35 V2 Analog TBSNanoRX weight: 263.8g
nReceiver: PNP, GEPRC ELRS2.4G, TBS Nano RX
nRecommended battery:LiPo 1050mah-1300mah
nFlight time:5′00″ -8′ 30″
nIncludes
n1 x Cinelog35 V2 Analog
n2 x HQProp D-T90MM(2 pairs)
n2x M20*250mm battery strap
n2 x Battery Silicone Pads
n1 x Set of screws
n1 x L-shaped screwdriver (1.5mm)
n1 x L-shaped screwdriver (2mm)
n1 x L-shaped screwdriver (3mm)
n1 x M5 wrench
n1 x plastic tweezers
n1 x Antenna fixed tube (pair)
n1 x Keychain
n1 x GoPro Mounting Base
n1 x Naked GoPro Mounting Base
n1 x Antenna Mounting Base
nScrew package includes:
n2x cup head screws M2*18
n2x round head screws with pad M2*5.5
n1x round head screws M2*12
n2x Rivet nut M2
n4x round head screws M2*8
n4x round head screws M2*7
n4x round head screws M2*6
n2x round head screws M2.5*6
n2x hexagonal screw M1.6*8
n1x Flange nuts M5
n2x Press Rivet Nuts_Brass color M2*1.9-OD4.9
n2x Iron nut M2
n2x Iron nut M2
n2x Camera gimbal shock absorbing rubber
n
n