GEPRC TAKER F722 BLS 100A 8S Stack

Description

Featuren1. Uses the mainstream STM32F722 chipn2. Equipped with the latest 42688-P gyroscopen3.16M onboard black box storagen4. Integrated LC filtern5. Upgraded Type-C USB interfacen6. Directly plugs into the DJI Air Unitn7. Paired with the TAKER H100_8S_BLS 100A 4IN1 ESC, providing a smooth flying experiencen8. Simple and efficient installation method with shock absorbers for stable gyroscope performancen9. Dual independent BECs: 12V@3A and 5V@3An10. Supports 8S Lipo batteriesn11. Support direct insertion of 8 motorsnSpecificationsnTAKER F722 8S Flight ControllernMCU: STM32F722nIMU: ICM42688-P(SPI)nAir Unit Connection: Direct plugs into DJI Air UnitnBlack Box: 16M onboardnUSB Interface: Type-CnBarometer: SupportednOSD: BetaFlight OSD w/ AT7456E chipnBEC: 5V@3A,12V@3A dual BECnFirmware Target: TAKERF722SEnDimension: 38.5×38.5mm,nMounfing Hole Size: 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circlenInput Voltage: 3-8S LiPonUART: 6 UARTsnPower Filter: Integrated LC filternWeight: 8.1g IncludesnTAKER H100_8S_BLS 100A 4IN1 ESCnInput Voltage: 3-8S LiponAmmeter: SupportnCalibration value: 200nContinue Current: 100AnBurst Current: 105A (5 seconds)nSupport Protocol: Dshot 150/300/600nSize: 56.3*61.1 mm; hole: 30.5×30.5 mm; φ4 mm hole becomes φ3mm after using the silicone shock-absorbing ring.nWeight: 28.8gnTarget: B_X_30nIncludesn1 x FC boardn1 x ESC boardn1 x Capacitorn1 x O3 3-in-1 connection cablen2 x FC adapter cablen1 x sh1.0 4pin silicone cablen1 x Camera connection cablen1 x VTX connection cablen1 x XT90 power cablen4 x M3*30 screwsn4 x M3*25 screwsn8 x Nylon nutsn12 x Silicone anti-shake pads