GEPRC TAKER F722 BT 32Bit 50A BetaFlight OSD w/ AT7456E Chip STACK Racing FPV Drone

Description

Feature
1. Use mainstream STM32F722 chipn2. Equipped with the latest 42688-P gyroscopen3. 512M black box storagen4. Support Bluetooth parameter tuningn5. Integrated LC filtern6. Upgrade type-C USB interfacen7.With GEP-BL32 50A 96K 4IN1 32Bit ESC, silky flightn8. Directly plugs into the DJI Air Unitn9. Simple and effective installation with shock-absorbing mounts for stable gyroscope performancen10. Integrated Barometern11. 9V@2.5A + 5V@3A dual independent BEC
Specifications
GEP-F722-BT-HD V3 Flight Controller
MCU: STM32F722nIMU：ICM42688-P(SPI)nAir Unit Connection: Directly plugs into the DJI Air UnitnBlack Box: 512M onboardnBluetooth: SupportednBarometer: SupportednUSB Interface: Type-CnOSD: BetaFlight OSD w/ AT7456E chipnBEC: 5V@3A, 9V@2.5A dual BECnFirmware Target: GEPRCF722_BT_HD_V3nSize: 36.9×36.9mm, hole: 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing ringnInput Voltage: 3-6S LiPonUART: 5 groups (UART4 fixed for Bluetooth)nPower Filter: Integrated LC filternWeight: 8.2g
GEP-BL32 50A 96K 4IN1 ESC
Model: GEP-BL32 50A 96K 4IN1 ESCnInput Voltage: 3-6S LiponContinue Current：50AnBurst Current: 55A (5 second)nGalvanometer：SupportnTelemetry: SupportnSupport Protocol: Dshot 150/300/600nSize：42.5×42.1mm，hole30.5×30.5mmnWeight：14gnTarget: ST_G0_05 – 31.92nNote: Pre-installed with BL32 test firmware, extensively tested for safety and reliabilityn(AM32 also supported; customer flashing required.)
Includes
1 x FC boardn1 x ESC boardn1 x Capacitorn1 x O3 3-in-1 connection cablen1 x FC adapter cablen1 x sh1.0 4pin silicone cablen1 x Camera connection cablen1 x VTX connection cablen1 x XT90 power cablen4 x M3*30 screwsn4 x M3*25 screwsn8 x Nylon nutsn12 x Silicone anti-shake pads