Description
n
nBrand Name: RadioMaster
n
Item Name: TX16S Mark II Radio Controller
n
Color: Black
n
Version: 4-IN-1/ELRS
n
Gimbal: V4.0 Hall
n
Size: 287x129x184mm
n
Weight: 750g (without battery)
n
Transmission frequency: 2.400GHz-2.480GHz
n
Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)； Option 2: Internal ELRS (SX1280)
n
Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
n
Antenna gain: 2db (transmit power adjustable)
n
Working current: 400mA
n
Working voltage: 6.6-8.4v DC
n
Remote control distance:> 2km @ 22dbm
n
Radio firmware: EdgeTX
n
Module Firmware: Multiprotocol- Module (4IN1) -OR- ExpressLRS (ELRS)
n
Channels: Up to 16 channels (depending on the receiver)
n
Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
n
Gimbal: Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor
n
Module Bay: JR compatible module bay
n
Upgrade method: Supports USB-C online / SD card offline upgrade
n
n
n
Bullet Point:
n
Improved internal circuity and optimized power supply.
n
New charge circuitry with integrated reverse-polarity protection.
n
Optimized charge IC now allows up to 2.2A internal USB-C charge current.
n
Rear mounted audio jack provided headphone output.
n
V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
n
Optional high/low rear grips included for improved ergonomics.
n
Improved S1/S2 knobs with clear centre-detents.
n
Improved LS/RS Sliders with smoother feel and better centre-detents.
n
Redesigned battery cover for improved battery access.
n
Retooled body shell with improved fit and finish.
n
Trainer socket changed to standard TRS 3.5mm socket.
n
Rear DIY Socket added for personalised mods.
n
Improved internal plastics for better longevity.
n
Available ELRS and 4in1 versions.
n
n
n
Features:
n
Support EdgeTX and OpenTX
n
EdgeTX is installed by default (Touch screen enabled).
n
– Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.
n
ELRS versions by default
n
V4.0 HALL GIMBALS
n
– Standard version with V4.0 Hall Gimbals, same chipset as the AG01, optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable.
n
Flat & Raised Grips Included
n
Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.
n
Built-in dual speakers
n
External Module Bay
n
– The TX16s natively supports Team Black Sheeps MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfires via software, no more module swapping.
n
Easy Firmware Updates
n
Upgraded Design
n
– Retooled faceplate with improved fit and finish
n
– Improved S1/S2 knobs with center detents
n
– 4.3” IPS Color Display – The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.
n
– Improved LS/RS Sliders with smoother feel and better centre-detents.
n
– New 3.5mm Audio jack – Rear mounted audio jack minimizes RF interference from external modules and adds headphone audio feature.
n
– Redesigned battery cover, easier to remove.
n
– Rear DIY Socket added for personalised mods.
n
Reviews
There are no reviews yet.