GEPRC TAKER H743 BT 32Bit 65A Stack 32Bit 65A 4IN1 ESC Dual Gyro Data Analyze Record Flight Barometer for Racing Drone MOZ7 V2

Description

GEPRC TAKER H743 BT 32Bit 65A Stack
nThe TAKER H743 BT 32Bit 65A STACK is the latest stack system developed by the GEPRC team. It features a high-performance STM32H743VIH6 chip with a Cortex-M7 core running at up to 480MHz, handling both racing and freestyle flights with ease. Its dual gyroscope setup, using MPU6000 and ICM42688-P, ensures precise control. With integrated Bluetooth for wireless parameter adjustments and a built-in 512MB black box, it’s well-equipped. It also offers eight motor output ports and is compatible with X8 models.
n
nCompatible with Betaflight, INAV, and Ardupilot, it ensures flexibility. The dual independent 5V@3A + 12V@2.5A BEC ensures stable charging and motor voltage options. Features include seven UART ports, an integrated barometer, and plug-and-play functionality. With the TAKER H65_8S_32Bit 65A 4IN1 ESC, it delivers an exceptionally smooth flight experience.
n
nFeature
n1. Adopts the high-performance STM32H743 as the main controller
n
n2. Equipped with MPU6000 and 42688-P dual gyroscopes
n
n3. 512MB high-capacity black box storage
n
n4. Bluetooth parameter tuning
n
n5. Plug-and-play, no soldering required
n
n6. Integrated barometer
n
n7. Features 7 UART ports
n
n8. Independent BEC with 12V@2.5A and 5V@3A outputs
n
n9. Supports multiple firmware options
n
n10. Equipped with the TAKER H65_8S_32Bit 65A 4IN1 ESC for a smooth flight experience
n
nSpecifications
n
nTAKER H743 BT 32Bit 65A STACK
nFC model: TAKER H743 BT Flight Controller
n
nMCU: STM32H743
nIMU: MPU6000 + ICM42688-P(dual gyro)
nAir Unit Connection: direct plug for DJI Air Unit
nBlack Box: 512M onboard
nBluetooth: Supported
nBarometer: Supported
nUSB Interface: Type-C
nOSD: BetaFlight OSD w/ AT7456E chip
nBEC Output: 5V@3A,12V@2.5A dual BEC
nTarget: GEPRC_TAKER_H743
nDimension: 38.5×38.5mm, mounting hole size 30.5×30.5mm
nInput Voltage: 3-6S LiPo
nUART Ports: 7 groups (UART3 fixed for Bluetooth)
nPower Filtering: Integrated LC filter
nWeight: 8.4g
n
nESC Model: TAKER H65_8S_32Bit 65A 4IN1 ESC
n
nInput Voltage: 3-8S Lipo(STACK only supports 3-6S)
nAmmeter: Support
nContinue Current：65A
nBurst Current：70A（5 seconds）
nSupport Protocol: Dshot 150/300/600
nSize：42×45.7mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
nWeight: 15.8g
nTarget: GEPRC_F4_4in1
nNote: pre-installed with BL32 test firmware, extensively tested for safety and reliability(AM32 is also supported, customer flashing is required.target:AM32_AT32DEV_F421)
n
nIncludes
n1 x TAKER H743 BT Flight Controller
n
n1 x TAKER H65_8S_32Bit 65A 4IN1 ESC
n
n1 x Electrolytic capacitor(50V 1000uF)
n
n1 x DJI connection cable(SH1.0 6pin 100mm)
n
n1 x FC adapter cable(SH1.0 8pin 30mm)
n
n1 x Receiver silicone cable(SH1.0 4pin 150mm)
n
n1 x Camera connection cable(SH1.0-SH1.25 3pin 60mm)
n
n1 x VTX connection cable(SH1.0 4pin-6pin 100mm)
n
n1 x XT60 power cable(12AWG 110mm)
n
n4 x M3*30 screws
n
n4 x M3*25 screws
n
n8 x Nylon nuts(M3)
n
n12 x Silicone anti-shake pads(M3)
n
n